EZ FIT WINDOW BLINDS MEASURING and FITTING INSTRUCTIONS

EZ Fit Pleated Blinds can be fitted to most windows that have an internal rubber seal. It is important to measure as accurately as possible (especially the width).The blind is designed to fit inside the frame. Measure the exact frame* width and drop.If the rubber seal is visible in from the frame, measure the visible glass size.FITTING INSTRUCTIONSUSEFUL TIPS• It helps installation if you smear a little washing up liquid onto the bracket.• Use a flathead screwdriver and hammer to tap brackets right in to corners of the frame.STEP 1Clip the EZ Fit Bracket into the insertion tool and push bracket into the frame between the glass and the rubber seal. STEP 2 Fit the EZ Fit Brackets into the four corners of the frame. STEP 3 Clip the top rail of the blind onto the brackets and repeat procedure for bottom rail.STEP 4 The tension of the blind has been pre-set by the factory. However, if less or more tension is required, unclip bottom rail and adjust cord on locking clamp on the reverse side of rail.