JTFS Effluent Pumping Stations 150L

JTFS Effluent are Pre-assembled Package Pumping stations for the removal of clean / grey / effluent water where gravity flow is not possible Single and Twin JTFS Effluent package pump stations for the removal of effluent from sewage treatment plants and also surface water.

Simple to install. To handle clean, dirty or slightly polluted water. Ideal for pumping effluent from septic tanks or sewage treatment plants, but can also be used for cellars, small sumps and pumping out rain water.

The standard pumping station has a single Oliju R35.60 submersible pump

This Smallest Single JTFS Effluent 150L Pumping Station is a pre-assembled, ready to use package pumping station suitable for the handling of clean, grey or effluent water.

Suitable for Removing Grey Water From:

Final Effluent from Sewage Treatment Plant

Drainage of Cellars & Basements

Kitchens, Dishwashers, Sinks and Showers

Surface and Nuisance Water Drainage

600mm Diameter x 500mm

GRP tank

Pump with float

up to 14m lift

10 metres of cable

150 Litre total capacity

Pedestrian rated cover

110 mm inlet (drill on site)

Internal pipework 1 1/4" Pipework and fittings complete

Non return valve

Available for Next Working Day delivery

There must be 470mm below the bottom of the inlet pipe to allow for the pump to operate.

Effluent Pumping Stations include:

1 x. 600 mm diameter x 500 mm deep GRP chamber.

1 x. 32mm automatic (Suspended solids 5mm max) handling pump.

1 x. non-return valve valve.

1 x. pedestrian rated cover

1 x. 32mm outlet adaptor to connect to MDPE

An alarm is recommended for this unit.