Coburn 61742 HIDEAWAY? H42 Pocket Door Kit, 1067mm (3'6") Maximum Door Width, 2032mm (6'8") Maximum Door Height

Coburn HIDEAWAY Pocket Door Frame Kit For interior doors sliding into a pocket within the wall Application The HIDEAWAY Pocket Door Frame Kit is a simple way to increase available space in many domestic applications, particularly dining rooms, en-suite bathrooms, cloakrooms and doors into kitchens. Construction The HIDEAWAY Pocket Door Frame Kit is manufactured to a finished thickness of 90mm to suit doors up to 35mm. When the kit is to be used in a run of other studwork, it is important that this is erected to an equivalent thickness or that the plasterwork fixed to the frame is packed as required. If a finished thickness of 100mm is required or if the door is between 35mm and 44mm, the Adaptor Kit provided should be used. Maximum door thickness without adaptor 35mm Maximum door thickness with adaptor 44mm Maximum door thickness with HIDEAWAY Cavity Widening Kit 50mm Finished thickness with 2 x 12.5mm wall boards without adaptor 115mm Finished thickness with 2 x 12.5mm wall boards with adaptor 120mm 61730 Set H30, 760mm wide, Maximum door height 2032mm, Maximum door weight 56kg 61736 Set H36, 915mm wide, Maximum door height 2032mm, Maximum door weight 56kg 61742 Set H42, 1067mm wide, Maximum door height 2032mm, Maximum door weight 90kg Components HIDEAWAY Pocket Door Frame Kits are supplied with: Header assembly, 4 Steel wrapped studs (6 with H42), 2 Stud foot brackets (3 with H42), 2x3-wheel hangers, 2 Hanger mounting plates, 1 Rubber door stop, 2 Nylon door guides, screws, installation instruction, spanner and HIDEAWAY? adaptor kit. Features & benefits Space Saving Easy Access Quiet Operation Easy Installation Economical Prefabricated Components Bi-Parting doors:- Where 2 converging doors are to be fitted, a HIDEAWAY 61600 Pocket Connector Kit should be used with 2 HIDEAWAY Pocket Door Frame Kits. Non standard thickness doors For doors between 45mm and 50mm, a HIDEAWAY Cavity Widening Kit is required. Building regulations - Approved Document Part M The NHBC has confirmed that a door system such as HIDEAWAY Pocket Door provides a compliant means of access for toilets and bathrooms under Approved Document M of the Building Regulations. Steel-wrapped studs, nailed to the pre-assembled header, give maximum rigidity and restrict accidental nail penetration. Keyhole slots in the aluminium box-section track allow easy removal (without damage to the wall) in the unlikely event of this being necessary. Self-adjusting floor plates Long vertical fingers slide into the studs allowing for floor settlement without disturbing the horizontal alignment of the header and track. Unique hanger locking clip allows exceptionally easy fitting and removal of the door from the hanger and keeps it secure during operation.