Trend AR/JIG Aperture And Radius Jig

Product Code: TRE-AR/JIG

Trend AR/JIG Aperture And Radius Jig

For routing apertures and radii in worktops for sinks, hobs and curved cabinets. Use with 12.7mm cutter and 30mm guide bush.

External Radii of 50, 100 & 200mm

Engraved Lines for Internal Radius Curves

45° End Cut

26 & 35mm Cabinet Door Hinge Recess Facility

Peg Holes for External Radius Curves



A jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and to suit curved cabinets.

Will cut both an internal and external radiius with the use of either pins or engraved sight lines.

Will cut a 90 degree angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.

Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and has external radii of 50mm, 100mm and 200mm

Jig has a 45 degree end cut , plus 26mm and 35mm cabinet door hinge recess facility.

Engraved lines to position jig to marked position on the worktop.

Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge.

Pins made from ABS plastic for strength.