30/30T Thumbturn Euro Cylinder
Product Code: KMD/30/30T
Description30/30T Double Euro-Cylinder
Each cylinder comes with its own 3 keys
The MAXUS 30/30T Thumbturn Euro Cylinder is an ideal security solution for shopfront and uPVC double-glazed doors. This high-quality, 6-pin cylinder lock is anti-pick, anti-drill and comes with a feature that allows the key to open the outside of the door and a simple Thumb Turn mechanism to lock and unlock the inside. The Maxus 30/30T Thumbturn Euro Cylinder is available in dual finish and can be Master Keyed and Keyed Alike if required.
This lock offers superior protection against forced entry. It also features an anti-snap drill bump and pick protection which makes it difficult for burglars to gain access to your property or premises. Additionally, this lock comes with three keys per lock so you can have peace of mind knowing that your home or business is secure.
Overall, the MAXUS 30/30T Thumbturn Euro Cylinder provides excellent security for shopfronts and double glazed doors and offers superior protection against forced entry.
Security Features include:
Anti-Snap
Anti-bump
Anti-pick
Anti-drill
Anti-Pull
Dual Finish
Supplied with 3 keys
Common Euro Cylinder Features Explained
EURO CYLINDER locks are a common type of lock found in most uPVC and aluminium doors. A euro cylinder lock can be fitted easily without the need for a locksmith and you should be able to obtain one that will fit any door.
THUMBTURN CYLINDERS are often found on classroom and office doors. The thumbturn allows you to lock the door from the inside while a key is needed to open the door from the outside.
ANTI-DRILL
Stainless steel pins within the cylinder provide anti-drill protection where the steel from the drill bit is softer than the protective metal.
ANTI-SNAP
Anti-snap features help to prevent lock snapping (hammering the lock in a forced entry) but primarily leaves enough of the lock in working order.
ANTI-PICK
Some locks can be picked open using a hair pin or a paperclip. Anti pick locks are designed so that it is almost impossible to open the lock in that way.
ANTI-BUMP
Lock bumping is a technique used to open a lock using a special key to jolt it open. Anti-bump locks have a specially made key and more pins.
FITTING
Euro cylinders have the same dimensions and are easy to install and remove. The actuator in the centre needs to be turned with a key so that it lines up flush with the lock hole and then a screw in the frame of the door holds it in place.
1. Locate and remove the fixing screw on the side edge of the door.
2. Insert the key into one side whilst slowly turning the key to enable you to push the old cylinder out.
3. Measure the overall length of the cylinder and the dimensions either side of the centre hole.
4. With the key in the lock and the cam lined up with the cylinder, insert your new lock.
5. Secure the lock in place with the new fixing screw provided.
It is important to remember that the cylinder has an external and internal side which must be the correct way round when fitting the lock.
The MAXUS 30/30T Thumbturn Euro Cylinder is the perfect choice for shopfront and double-glazed doors. It offers a range of features and benefits to ensure maximum security and convenience.
Key Features:
6-pin, anti-pick, anti-drill euro cylinder
Supplied in dual finish to reduce stock holding
Can be keyed alike or master keyed
Comes with three keys per lock
Keys are different for each lock
Benefits:
High security against forced entry
Easy installation with no additional components required
Convenient access from both sides of the door with thumbturn and key
3 keys for each lock ensures extra convenience
Packaging
Boxed
A Side / B Side
30mm / 30mm Thumbturn
Alias Brand
MAXUS
Brand
MAXUS
Barcode
5055120786100
Differs
1
Cylinder Size With Cam
30/30T
Cylinder Size Overall
60mm
Length
60mm
Manufacturer Reference
KMD/30/30T
Keys Supplied
3
Guarantee
1 Year
Finish
NP/PB Dual Finish
Keyed
Keyed to Differ
LockDoctor.Biz Ltd is a national supplier of replacement locks and keys for lockers, filing cabinets and office furniture. For the last 20 years we have specialised in replacing lost and broken keys and other security equipment for residential, commercial, and industrial applications, delivered anywhere in the United Kingdom, usually next day.
We are specialists in replacement office furniture keys. Replacement keys are also available next day for desks, pedestals, tambour units, filing cabinets and cupboards. If you are not sure that this is the correct type of key for you, just email a picture of your lock face or the original key to sales@lockdoctor.biz and we will help.
We cut these keys using the latest electronic and semi-automatic machines. Keys are cut according to the manufacturers’ own code with precision and effectively the same quality as an original key. The key blanks we use are best quality full-steel and manufactured specially for us.
We process orders for hundreds of locks within a few hours. Small orders are usually dispatched immediately within the hour.
Overall, the MAXUS 30/30T Thumbturn Euro Cylinder provides excellent security for shopfronts and double glazed doors and offers superior protection against forced entry.
Security Features include:
Anti-Snap
Anti-bump
Anti-pick
Anti-drill
Anti-Pull
Dual Finish
Supplied with 3 keys
Common Euro Cylinder Features Explained
EURO CYLINDER locks are a common type of lock found in most uPVC and aluminium doors. A euro cylinder lock can be fitted easily without the need for a locksmith and you should be able to obtain one that will fit any door.
THUMBTURN CYLINDERS are often found on classroom and office doors. The thumbturn allows you to lock the door from the inside while a key is needed to open the door from the outside.
ANTI-DRILL
Stainless steel pins within the cylinder provide anti-drill protection where the steel from the drill bit is softer than the protective metal.
ANTI-SNAP
Anti-snap features help to prevent lock snapping (hammering the lock in a forced entry) but primarily leaves enough of the lock in working order.
ANTI-PICK
Some locks can be picked open using a hair pin or a paperclip. Anti pick locks are designed so that it is almost impossible to open the lock in that way.
ANTI-BUMP
Lock bumping is a technique used to open a lock using a special key to jolt it open. Anti-bump locks have a specially made key and more pins.
FITTING
Euro cylinders have the same dimensions and are easy to install and remove. The actuator in the centre needs to be turned with a key so that it lines up flush with the lock hole and then a screw in the frame of the door holds it in place.
1. Locate and remove the fixing screw on the side edge of the door.
2. Insert the key into one side whilst slowly turning the key to enable you to push the old cylinder out.
3. Measure the overall length of the cylinder and the dimensions either side of the centre hole.
4. With the key in the lock and the cam lined up with the cylinder, insert your new lock.
5. Secure the lock in place with the new fixing screw provided.
It is important to remember that the cylinder has an external and internal side which must be the correct way round when fitting the lock.
The MAXUS 30/30T Thumbturn Euro Cylinder is the perfect choice for shopfront and double-glazed doors. It offers a range of features and benefits to ensure maximum security and convenience.
Key Features:
6-pin, anti-pick, anti-drill euro cylinder
Supplied in dual finish to reduce stock holding
Can be keyed alike or master keyed
Comes with three keys per lock
Keys are different for each lock
Benefits:
High security against forced entry
Easy installation with no additional components required
Convenient access from both sides of the door with thumbturn and key
3 keys for each lock ensures extra convenience
Packaging
Boxed
A Side / B Side
30mm / 30mm Thumbturn
Alias Brand
MAXUS
Brand
MAXUS
Barcode
5055120786100
Differs
1
Cylinder Size With Cam
30/30T
Cylinder Size Overall
60mm
Length
60mm
Manufacturer Reference
KMD/30/30T
Keys Supplied
3
Guarantee
1 Year
Finish
NP/PB Dual Finish
Keyed
Keyed to Differ
LockDoctor.Biz Ltd is a national supplier of replacement locks and keys for lockers, filing cabinets and office furniture. For the last 20 years we have specialised in replacing lost and broken keys and other security equipment for residential, commercial, and industrial applications, delivered anywhere in the United Kingdom, usually next day.
We are specialists in replacement office furniture keys. Replacement keys are also available next day for desks, pedestals, tambour units, filing cabinets and cupboards. If you are not sure that this is the correct type of key for you, just email a picture of your lock face or the original key to sales@lockdoctor.biz and we will help.
We cut these keys using the latest electronic and semi-automatic machines. Keys are cut according to the manufacturers’ own code with precision and effectively the same quality as an original key. The key blanks we use are best quality full-steel and manufactured specially for us.
We process orders for hundreds of locks within a few hours. Small orders are usually dispatched immediately within the hour.
Visit the Lock Doctor Services Ltd website for more information on 30/30T Thumbturn Euro Cylinder
ENQUIRY FORM
