Lithofin Resin-EX - Special Stripper Gel - 1 Litre

Product Code: 31404

This special remover is based on acidic reaction compounds supported by select, highly active organic solvents.?In many cases Lithofin Resin-EX can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products.?\nFIELD OF USE\nTo remove epoxy grout materials and residues.ALso highly suitable for removing organic substances such as resins, sealants, coatings, oil and grease depositspaint (grafitti), lacquer, adhesives, plastic residues, etc.Suitable for indoor and outdoor use.\nSurfaces:?All quarry and ceramic tiles, rough and natural stones such as granite, gneiss, quartzite as well as concreteand concrete stone.\nSurfaces:?NOT Suitable for Polished or Honed calcareous stone (e.g. marble. limestone, concrete stone, etc)\nDIRECTIONS FOR USE\nTest the product prior to use.ALways aplly to a dry surface. Protect the surface from wetness during working time, because water represses the effectiveness.Application / Surface Temperature: 10 - 30 CelciusThe mentioned working times are shorter at higher temperatures and longer in colder temperatures.\nDIRECTIONS TO REMOVE PAVEMENT FIXING MORTAR\nGenerously apply to the dry surface using a brush or a scrubber.Allow to work for up to approx. 20-30 min. at room temp. of about 20?C.?Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush.?Afterwards, rinse and brush. Always brush diagonally to grouts. Rinse surface again with water.In case of any leftovers, repeat when surface is dry\nCoverage: up to approx. 5 m?/L, depending on dirt.\nDIRECTIONS TO REMOVE EPOXY RESIN (2K) MORTAR\nGenerously apply to the dry surface using a brush o a roller. Allow to work for approx. 3 hrs at about 20?CThen use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately.\nCoverage: up to approx. 20 m?/L on glazed tiles.?\nStorage: Cool and closed, shelf life of up to 2 years\nFor more information see Technical & Safety Data Sheets.