Lithofin Rust EX Non Acidic Rust Stain Remover - 500ml

Product Code: 29878

Removes rust stains and discolouration from tiles, natural stone, concrete and artificial stone. Can be used on spots, as well as on limestone and marble.\nProperties:The reactive compounds work on the rust and transform it into water soluble particles. The reactionbecomes visible through a purple discolouration.The resulting particles can be rinsed off with water. Lithofin Rust-EX does not change the appearance of the surface and can therefore be used on single stains.\nField of Use:For removing all kinds of rust stains. Causes for these stains may be iron containing fertilizers, metall garden furniture, leaking heating systems, etc.\nSurfaces: suitable for all ceramic surfaces, marble, limestone, granite, gneiss, concrete and artificial stone.\nDirections for Use:Generously apply undiluted product to the dry surface and distribute with a brush. A purple discolouration shows the start of the reaction. Allow to work for about 5 minutes, 10 minutes max! Do not allow product to dry. After working time, add water and a splash of Lithofin MN Power-Clean (or diluted dish liquid), brush and rinse off with plenty of water.\nImportant: working time must not exceed 10 minutes. Repeat procedure in case of unsatisfactory results.Ferrous natural stones or stones containing as well as coloured concrete stones may change colour after treatment with Lithofin Rust-EX.\nPlease Note: always try product in an inconspicuous area prior to use. Avoid contact with metal, varnish, wood, etc. Long working times on polished limestones may cause the surface to become slightly dull. The remaining light discolouration will disappear with time.\nApplication Temperature: not below 15?C.\nCoverage: up to 10 m2/ Litre\nStorage:Cool, dark and closed. Use up within 6 months.Product will turn purple with time.