LTP Mattstone Impregnating Sealer For Natural Stone Tiles - 1 Litre

Product Code: 30029

Suitable for Interior & Exterior useA completely natural, matt finish for Travertine, limestone, terracotta, quarry tiles, slate, sandstone,marble, concrete, brick and external paving. Delicately enhances colour and texture. Helps protectagainst staining. Strongly repels water, oil and grease. Allows surface to breathe.\nDirections for use:Shake the bottle prior to use. Ensure surface to be treated is completely clean, dry and free from dirt, grime,cement and grout. Apply 2-3 coats of LTP Mattstone with a soft cloth or brush allowing at least 2 hoursbetween coats. More absorbent floors may require further coats and on such floors the product should begenerously applied. 1-2 hours after application, rub over the surface with a soft fluff free cloth or buffingmachine to obtain a uniform finish and remove any material not yet absorbed. LTP Mattstone will dry afterabout two hours, but will take a further three days to become fully resistant. N.B. The aim is to completelyfill the substrate with Mattstone without over applying it. Do not apply in direct sunlight. Mattstone willhelp to inhibit oil based stains but such spillages should be wiped up immediately. On rougher surfacedfloors it may be prudent to use an appropriate surface sealer in conjunction with ‘Mattstone’.\nCoverage:Lower porosity floors - approximately 1-2 litres per 10m2 of floorHigher porosity floors - approximately 3-4 litres per 10m2 of floor\n\n