Everbuild 201 Mortar Admix Plasticiser 25 Litre ADM25L Admixture

�

�

�

�

Everbuild 201 Mortar Admix Plasticiser

Product Option: 25 Litre ADM25L

Barcode: 5029347002152

201 25 Litre EVERBUILD MORTAR ADMIXTURE is an liquid plasticising air entraining admixture which forms extremely stable air bubbles in mortar mixes.

The Everbuild 201 admix improves workability and freeze-thaw resistance in brick laying mortars, reduces the need for lime and smoothes out variations between separate batches of sand and cement.

�

Areas For Use:

Load bearing brickwork

Block laying

External and Internal rendering

Pointing and repointing brickwork.

�

Everbuild 201 Benefits:

Outperforms traditional Vinsol Resin Based plasticisers (See Technical Data Sheet)

Contains a special additive which keeps air in the mix longer than most other competitive admixtures.

Improves trowel-ability.

Easier tamping down and alignment.

Improves workability.

Provides resistance to freeze-thaw cycling down to -2oC in both wet and dry mortar.

Chloride free - chloride ion content <0.1%.

Reduces bleeding.

Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence.

�

Important Notes:

Do not use in structural concrete.

Do not overdose.

Do not mix with other additives in same gauging water.

Do not use in lime based mixes

�

Application:

In all cases, add to mix at an addition rate of 150ml to 250ml per 50kg cement , depending on the degree of plasticising/entrainment required. Note: remember to reduce required quantity of water

accordingly. One litre of MORTAR ADMIX added to a 200ltr drum of gauging water will be sufficient for gauging approx. 4 x 50kg cement for mortar or render mixes. Whilst overdosing should be avoided, this formulation does safeguard against moderate overdosing.� (up to double the maximum rate).

�����������������������������������������������

"The following are examples of modified mix designs."

�

1: 0.25 :3� cement : lime : sand.��

use 1 : 3� cement : sand : + MORTAR ADMIX. ���

�

1:1:6 cement : lime : sand.

use 1 : 6� cement : sand + MORTAR ADMIX.

�

BRICKLAYING/POINTING Use a mix design appropriate to brick strength

(1 : 3� to 1 : 6).

�

INTERNAL RENDERS - 1 : 6� + MORTAR ADMIX.

�

EXTERNAL RENDERS - 1 : 3 + MORTAR ADMIX.