Product Code: 29656

Stixall Multi Purpose Wall and FloorAdhesive White 4kg STIXWFWE4

�

�

�

Stixall Multi PurposeWall and Floor Adhesive White 4kg

Barcode:5029347614508

Product Code:STIXWFWE4

Stixall Wall and Floor is a multi-purpose highspecification, trowel applied adhesive for bonding virtually anysubstrates and materials.

It is ideal for many uses including bondingwood floor, tiles, lino, vinyl, hygienic panels etc to porous ornon-porous substrates.

Based on the latest hybrid Polymer technologyStixall Wall and Floor is totally water and solvent free withextremely high bond strength, even in wet or dampconditions.

With an extended open time of up to 30 minutesthis product is ideal for large areas giving ease ofadjustability.

�

Benefits:

Can be applied to wet or dampsurfaces.

Solvent and water free ? will not causewarpage or curl of wood blocks planks.

Permanently flexible.

Over-paintable.

Adheres to most common buildingsubstrates.

Odourless.

Excellent gap filling properties for unevensurfaces.

Full bed elastic product gives excellent sounddeadening acoustic properties.

�

�

Areas Stixall Wall and Floor Adhesivecan be used:

Ideal for bonding of various materials to wallsor floors vertical or horizontal, for example tiles, brick,plasterboard, stone, concrete, PVC, wood, vinyl, metal,synthetics to porous or non-poroussubstrates e.g. concrete, cement, plasterboard, tiles, wood floor, lino, vinyl, hygienic panelsetc.

Will not bond to PE, PP and PTFE.

�

SurfacePreparation:

All surfaces must be clean sound and dust freeprior to application. Remove any loose, friable material with asuitable scraper or wire brush.

If a primer is required use EVERBUILD LUMBERJACK MB PRIMER

or Sika Bond Rapid DPM as directed.

�

Application:

Open tub. Spread evenly onto substrate with asuitable notched trowel at no less than 0.5kg/m�.

Do not spread more adhesive than can be coveredwithin 30 minutes.

Place material into position whilst adhesive isstill tacky within 30 minutes.

Removing uncured adhesive on surfaces and toolswith EVERBUILD MULTI USE WONDER WIPES.

Caution ? on flooring, test compatibilitywith lacquer finished blocks first.

Provide temporary support on verticalapplications until adhesive has dried.

Floor may be sanded trafficked 24 hours afterapplication, depending on site conditions this will be longer atlow temperatures.

�

ApproximateCoverage:

Approx. 2m per Kg

�

�

Limitations:

Always check with flooring manufacturer re: anyspecific instructions requirements specifically relating to theirflooring before fitting floors.

Do not use against bitumen or substrates thatbleed oil or plasticizers

On vertical surfaces always provide temporarysupport until adhesive has dried (usually 24-48 hours depending onambient temperature and humidity)

Do not use for overhead applications withoutmechanical fixings.

Do not use, store or allow to cure below+5�C.

Over paint ability as quality and type of paintcan vary, always test compatibility before use.

Do not use as an adhesive for polythene safetybacked mirrors.

When using on natural stone, always carry out acompatibility test as staining may occur on some.

�

�

�

Stixall Wall and Floor AdhesiveDocuments:

Stixall Technical Data Sheet

Stixall MSDS Safety Data Sheet

�

Seethe Full Range of Adhesives