Large Steel Telescopic Bollard
270, 220 or 160 mm DiameterBollard is zinc primed and finished in our RAL colours.
Lock unit: made of stainless steel. The stainless steel lock protector is spring loaded and shields the mechanism from ingress.
Ground-cover (skirt):
Made of 460, 10 mm gauge steel.
Non-slip with a raised paved, effect and a slope calculated to allow water to run off.
Galvanised & lacquered black, fixed to the casing by four stainless steel Hex socket cap head screws (� 12 mm).
Sliding mechanism:
The bollard support is equipped with guide ball bearings, distortion resistant, hard wearing. The bollard slides vertically in a removable drum inserted in the external casing and is raised using a sealed gas piston.
Casing:
External casing made of galvanised sheet steel, with strong lifting eyelets for quick and easy installation.
This product is designed to deter vehicular passage and it is not an �anti-ram� device and should not be used as such.
Closing: with one turn of the key, the bollard rises and automatically locks into the raised position
Opening: turn the key and remove it, then apply vertical pressure to the dome of the bollard with the foot, until it locks automatically in the lowered position
Lock unit: made of stainless steel. The stainless steel lock protector is spring loaded and shields the mechanism from ingress of dirt. The standard lock supplied uses an 11 mm triangle key.
Sliding mechanism:
The bollard support is equipped with guide ball bearings, distortion resistant, hard wearing. The bollard slides vertically in a removable drum inserted in the external casing and is raised using a sealed gas piston.
Casing:
External casing made of galvanised sheet steel, with strong lifting eyelets for quick and easy installation.
This product is designed to deter vehicular passage and it is not an �anti-ram� device and should not be used as such.
Closing: with one turn of the key, the bollard rises and automatically locks into the raised position
Opening: turn the key and remove it, then apply vertical pressure to the dome of the bollard with the foot, until it locks automatically in the lowered position
Lock unit: made of stainless steel. The stainless steel lock protector is spring loaded and shields the mechanism from ingress of dirt. The standard lock supplied uses an 11 mm triangle key.
Visit the Street Furnishings Ltd website for more information on Large Steel Telescopic Bollard
ENQUIRY FORM
