Menu

Measuring Guide

26-01-2015

When measuring the opening size it is the total distance between the inner face of one pillar/post to the inner face of the other pillar/post. Measure your distance with a steel tape measure. Please see the diagram on the right. If you are also buying posts, please remember to allow spaces for these too. Measuring Guide Gates Gates are measured from the bottom of the frame to the highest point of the gate. When measuring, please allow for ground clearance. This is typically 50mm (2"), but can be up to 110mm (4") if required. See the diagram on the right. Gates Fitting Guide All gates & railings are supplied with a fixing kit (brackets, screws etc), so you can easily fit your new gate/railing to existing timberwork or brickwork. A fitting service is available on request. Your new gates/railings will arrive coated with a protective black metal primer. Galvanizing and Powder Coating is available on request.

Visit the GatesLand Ltd website for more information on Measuring Guide

ENQUIRY FORM

More News

  • Testimonials

  • Measuring Guide